COR-TEN® A cold rolled is available in thicknesses of 0.50-3.00 mm and widths up to 1530 mm as coils, slit coils and as cut to length in lengths up to 8.5 meters.
Yield strength ReL (min MPa) | Tensile strength Rm (min MPa) | Min. inner bending radius for a 90° bend (x t) |
|---|---|---|
310 | 450 | 0.5 |
The mechanical properties are tested transverse to the direction of rolling.
If the yield point is not pronounced, the values apply to the 0.2% proof strength Rp0.2. If the yield point is pronounced, the values apply to the lower yield point (ReL).
C (max %) | Si (%) | Mn (%) | P (%) | S (max %) | Al (%) | Cu (%) | Cr (%) | Ni (max %) |
|---|---|---|---|---|---|---|---|---|
0.12 | 0.25 - 0.75 | 0.20 - 0.50 | 0.07 - 0.015 | 0.030 | 0.015 - 0.06 | 0.25 - 0.55 | 0.50 - 1.25 | 0.65 |
COR-TEN® A in cold rolled condition is supplied with thickness and width tolerances in accordance to EN 10131:2006. More narrow thickness tolerances are available on request.
Cut to length are supplied with length tolerances in accordance to EN 10131:2006.
Cold rolled.
COR-TEN A has extra corrosioin resistance with good formability, thoughness and weldability.
COR-TEN is an internationally registered trademark of United States Steel Corporation.
For information concerning fabrication, see SSAB’s brochures on www.ssab.com or consult Tech Support, [email protected].
Appropriate health and safety precautions must be taken when bending, welding, cutting, grinding or otherwise working on the product.
Download data sheet