AHSS trial material stock

High-Strength Low Alloy (HSLA):
Docol 420–500LA, 0.80–3.00 mm

Dual Phase (DP):
Docol 500–1180DP, 0.80–2.00 mm

Martensitic (M):
Docol 1100–1700M, 0.80–2.00 mm

Electrogalvanized Martensitic (M), 7.5 micron zinc layer double sided:
Docol 1300, 1500, 1700M-EG, 1.00–2.00 mm

Roll-forming:
Docol Roll 800–1000, 0.80–2.00 mm

Press-hardening:
Docol PHS 2000, 1.00–3.00 mm

Complex Phase (CP):
Docol PHS CR 2000, 1.00–3.00 mm

High-Strength Low Alloy (HSLA) acc. to VDA:
Docol HR 700LA, 2.00–2.50 mm

Dual Phase (DP) acc. to VDA:
Docol 590–980DP, 0.80–2.00 mm

Complex Phase (CP) acc. to VDA:
Docol 780-1180CP, 1.00–2.00 mm
Docol HR660Y760T-CP, 2.00–2.50 mm

Dual Phase with High Ductility steels acc. to VDA:
Docol 590–1000DH, 1.20–1.80 mm

Ferrite Bainite (FB) acc. to VDA:
Docol HR440Y580T-FB, 2.50–3.00 mm

High-Strength Low Alloy (HSLA):
Docol HR 700LA, 2.00–3.00 mm

High Edge Ductility (HE):
Docol HR355Y430T HE, 2.00–4.00 mm
Docol HR420Y480T HE, 2.00–4.00 mm
Docol HR460Y520T HE, 2.00–4.00 mm
Docol HR500Y550T HE, 2.00–4.00 mm

Complex Phase (CP):
Docol HR 800CP, 2.00–4.00 mm
Docol HR 800HER-75, 2.00–4.00 mm
Docol HR 800HER-100, 2.00–4.00 mm
Docol HR800Y950T-CP, 2.50–3.00 mm

Martensitic (M):
Docol HR 1200M, 2.00–3.00 mm
Docol HR 1500M, 2.00–3.00 mm

Ferrite Bainite (FB):
Docol 440Y580T-FB, 2.50–4.00 mm

In addition to the electrogalvanized grades listed here, SSAB also offers galvannealed and Galfan^® samples upon request. We can also provide sample AHSS tubes in a variety of dimensions. For more information please contact your Docol automotive steel expert.