Thickness (mminches) | Hardness 1) (HBW) | Yield strength Rp0.2 (min MPaksi) | Tensile strength Rm (min MPaksi) | Elongation A5 (min %) |
|---|---|---|---|---|
6.0 - 130.00.236 - 5.118 | 275 - 325 | 700101 | 800116 | 10 |
1) Hardness is measured, according to EN ISO 6506-1, on a milled surface 0.5 - 2 mm below the plate surface.
Thickness (mminches) | Min impact energy for transversal testing, Charpy V 10x10 mm test specimen 1) |
|---|---|
6.0 - 130.00.236 - 5.118 | 35 J / 20 °C26 ft-lbs / 68 °F |
1) Unless otherwise agreed, transverse impact testing according to EN 10025-6 option 30 will apply. For thicknesses between 6 - 11.9 mm, sub-size Charpy V-specimens are used. The specified minimum value is then proportrional to the cross-sectional area of the specimen compared to a full-size specimen (10 x 10 mm).
Ultrasonic inspection is carried out according to : EN 10 160 with extra demands according to specification SSAB V6.
Toolox® in engineering applications
Machining recommendations for Toolox®