Thickness (mminches) | Hardness 1) (HBW) | Yield strength Rp0.2 (min MPaksi) | Tensile strength Rm (min MPaksi) | Elongation A5 (min %) |
|---|---|---|---|---|
12.0 - 125.00.4 - 5.118 | 410 - 480 | 1150166 | 1300188 | 8 |
1) Hardness is measured, according to EN ISO 6506-1, on a milled surface 0.5 - 2 mm below the plate surface.
Thickness (mminches) | Min impact energy for transversal testing, Charpy V 10x10 mm test specimen 1) |
|---|---|
12.0 - 125.00.236 - 5.118 | 18 J / 20 °C15 ft-lbs / 64 °F |
1) Unless otherwise agreed, transverse impact testing according to EN 10025-6 option 30 will apply. For thicknesses between 6 - 11.9 mm, sub-size Charpy V-specimens are used. The specified minimum value is then proportrional to the cross-sectional area of the specimen compared to a full-size specimen (10 x 10 mm).
Ultrasonic inspection is carried out according to : EN 10 160 with extra demands according to specification SSAB V6.
According to EN 10163-2 Class B Subclass 3.
Toolox® in engineering applications
Machining recommendations for Toolox®