SSAB Domex® 240YP

Download data sheet

General Product Description

SSAB Domex 240YP meets or exceeds the requirements of S235JRC, S235J0C or S235J2C in EN 10025-2, depending on agreed impact strength requirements at the time of order. Upon agreement, it can be delivered double certified and CE marked.

Dimension Range

SSAB Domex 240YP is available in thicknesses of 1.80-20.00 mm and widths up to 1860mm depending on thickness as coils, slit coils and as cut to length in lengths up to 16 meters.

Mechanical Properties

Thickness
(mmin)
Thickness
(mmin)
1.80 - 3.000.709 - 1.18
Yield strength ReH
(min MPa)
240
Tensile strength Rm
(MPa)
360 - 460
Elongation A80 1)
(min %)
19
Elongation A5 2)
(min %)
28
Min. inner bending radius for a 90° bend
(x t)
0.2
Thickness
(mmin)
Thickness
(mmin)
3.01 - 6.001.19 - 2.36
Yield strength ReH
(min MPa)
240
Tensile strength Rm
(MPa)
360 - 460
Elongation A80 1)
(min %)
—
Elongation A5 2)
(min %)
28
Min. inner bending radius for a 90° bend
(x t)
0.3
Thickness
(mmin)
Thickness
(mmin)
6.01 - 20.002.37 - 7.874
Yield strength ReH
(min MPa)
240
Tensile strength Rm
(MPa)
360 - 460
Elongation A80 1)
(min %)
—
Elongation A5 2)
(min %)
28
Min. inner bending radius for a 90° bend
(x t)
0.4

1) A80 value applies for thicknesses < 3.00 mm.

2) A5 value applies for thicknesses ≥ 3.00 mm.

Impact Properties

Min. impact energy for longitudinal testing,
Charpy V 10x10 mm test specimens
Min. impact energy for longitudinal testing,
Charpy V 10x10 mm test specimens
J / °C

Chemical Composition (heat analysis)

C
(max %)
C
(max %)
0.12
Si
(max %)
0.03
Mn 1)
(max %)
0.80
P
(max %)
0.030
S
(max %)
0.025

1) Mn max 1.1% for thicknesses above 16mm.

Carbon Equivalent

Thickness (mmin)
Thickness (mmin)
Typical CEV ()
1.80 - 20.000.709 - 7.874
0.16
Thickness (mmin)
Thickness (mmin)
Typical CET ()
1.80 - 20.000.709 - 7.874
0.12
CET and CEV formula

Tolerances

Delivery Conditions

Thermomechanically rolled.

Surface and edge condition

SSAB Domex 240YP is available with non-pickled or pickled surface with mill or cut edge.

Fabrication and Other Recommendations

SSAB Domex 240YP is a cold forming steel not suited for heat treatments at temperatures above 580°C, since the material then maylose its guaranteed properties.

SSAB Domex 240YP has good laser cutting, cold forming and welding performance.

SSAB Domex 240YP is suitable for hot dip galvanizing. For information concerning fabrication, see SSAB’s brochures on www.ssab.com or consult Tech Support, [email protected].

Appropriate health and safety precautions must be taken when bending, welding, cutting, grinding or otherwise working on the product.

Contact Information

www.ssab.com/contact