Download data sheet
SSAB Domex® 500LA is a high-strength, low-alloy steel intended for general presswork, bending and forming. SSAB Domex 500LA offers consistent properties that assist modern, rapid production methods.
SSAB Domex 500LA is available in thicknesses of 0.45-3.00 mm and widths up to 1500 mm as coils, slit coils and as cut to length in lengths up to 8.5 meters.
Yield strength ReL (MPa) | Tensile strength Rm (MPa) | Elongation A80 1) (min %) | Min. inner bending radius for a 90° bend 2) (x t) |
|---|---|---|---|
500 - 620 | 570 - 710 | 14 | 0.5 3) |
The mechanical properties are valid in the transverse direction of rolling.
1) When the thickness is less than or equal to 0.7 mm, the minimum value for elongation is reduced by 2 units.
2) t = Sheet thickness.
3) For rolling direction and transverse direction.
C (max %) | Si (max %) | Mn (max %) | P (max %) | S (max %) | Al (min %) | Nb+Ti (max %) |
|---|---|---|---|---|---|---|
0.10 | 0.60 | 1.80 | 0.030 | 0.025 | 0.015 | 0.10 |
SSAB Domex LA products are supplied with thickness, width and length tolerances in accordance to EN 10131. Narrower tolerances are available upon request.
Cold Rolled.
For information concerning fabrication, see SSAB’s brochures on www.ssab.com or consult Tech Support, [email protected].
Appropriate health and safety precautions must be taken when bending, welding, cutting, grinding or otherwise working on the product.