SSAB Domex® 500ML

Download data sheet

General Product Description

SSAB Domex 500ML is a thermomechanicallyrolled steel with a minimum yield strength of 500 MPa. S SSAB Domex 500ML has no equivalent in any structural standard.

Dimension Range

SSAB Domex 500ML is available in thicknesses of 8.00-60.00 and in widths up to 3300mm depending on the thickness. More detailed dimensions are provided in the dimension program.

Mechanical Properties

Thickness
(mmin)
Thickness
(mmin)
8.00 - 16.003.15 - 6.299
Yield strength ReH
(min MPa)
500
Tensile strength Rm
(MPa)
570 - 760
Elongation A5
(min %)
16
Thickness
(mmin)
Thickness
(mmin)
16.01 - 40.006.303 - 15.75
Yield strength ReH
(min MPa)
480
Tensile strength Rm
(MPa)
570 - 760
Elongation A5
(min %)
16
Thickness
(mmin)
Thickness
(mmin)
40.01 - 60.0015.75 - 23.62
Yield strength ReH
(min MPa)
470
Tensile strength Rm
(MPa)
560 - 760
Elongation A5
(min %)
16

The tensile test is made transversallyto the rolling direction in compliance with EN10025-4.

Impact Properties

Thickness
(mmin)
Thickness
(mmin)
7 - 633 - 25
Min. impact energy for longitudinal testing,
Charpy V 10x10 mm test specimens
40 J / -60 °C

The impact test is made longitudinallyto the rolling direction in compliance with EN10025-4.

Chemical Composition (heat analysis)

C
(max %)
C
(max %)
0.18
Si
(max %)
0.50
Mn
(max %)
1.70
P
(max %)
0.020
S
(max %)
0.010
Al
(min %)
0.02
Nb
(max %)
0.05
V
(max %)
0.12
Ti
(max %)
0.05

Carbon Equivalent

Thickness (mmin)
Thickness (mmin)
CET (max )
8.00 - 60.003.15 - 23.62
0.31
Thickness (mmin)
Thickness (mmin)
CEV (max )
8.00 - 60.003.15 - 23.62
0.43
CET and CEV formula

Tolerances

Thickness

SSAB Domex ML products are delivered with tolerances that correspond to ¾ of EN 10029:2011 Class A as default value.

Length and Width

Width tolerances -0/+4-10mm depending on the thickness. Length tolerances -0/+15-25mm depending on length.

Shape

According to EN 10029.

Flatness

Maximum flatness deviation 6 mm/m.

Surface Properties

Delivery Conditions

Thermomechanically rolled (M).

Fabrication and Other Recommendations

Minimum inner bending radius is 1.0 x t transverse to the rolling direction and 1.5 x t longitudinal to the rolling direction up to max 20mm in thickness.

For information concerning fabrication, see SSAB’s brochures on www.ssab.com or consult Tech Support, [email protected].

Appropriate health and safety precautions must be taken when bending, welding, cutting, grinding or otherwise working on the product.

Contact Information

www.ssab.com/contact