SSAB Form 06

Download data sheet

General Product Description

SSAB Form 06 is a mild steel intended for forming with the best conceivable properties in both drawing and stretch forming operations. SSAB Form 06 is used for a wide variety of applications including vehicle parts, refrigerators, electric radiators and water radiators.

Dimension Range

SSAB Form 06 is available in thicknesses of 0.40-3.00 mm and widths up to 1500 mm as coils, slit coils and as cut to length in lengths up to 8.5 meters

Mechanical Properties

Yield strength R_p0.2 (max MPa)	Tensile strength R_m (MPa)	Elongation A₈₀ (min %)	r₉₀²⁾ (min)	n₉₀²⁾ (min)
170	270 - 330	41 ¹⁾	2.1 ³⁾	0.22

Yield strength R_p0.2
(max MPa)

170

Tensile strength R_m
(MPa)

270 - 330

Elongation A₈₀
(min %)

41 ¹⁾

r₉₀²⁾
(min)

2.1 ³⁾

n₉₀²⁾
(min)

0.22

The mechanical properties are tested transverse to the direction of rolling.

¹⁾ When the thickness is less than or equal to 0.7 mm and greater than 0.5 mm, the minimum value for elongation is reduced by 2 units. For a thickness less than or equal to 0.5 mm, the minimum value is reduced by 4 units.

²⁾ The values of r₉₀ and n₉₀ only apply to products with a thickness equal to or greater than 0.5 mm

³⁾ When thickness is greater than 2mm the minimum value is reduced by 0.2.

Chemical Composition (heat analysis)

C (max %)	Si (max %)	Mn (max %)	P (max %)	S (max %)	Al (min %)	Nb+Ti (max %)
0.010	0.040	0.25	0.025	0.020	0.015	0.10

C
(max %)

0.010

Si
(max %)

0.040

Mn
(max %)

0.25

P
(max %)

0.025

S
(max %)

0.020

Al
(min %)

0.015

Nb+Ti
(max %)

0.10

Tolerances

SSAB Form coldrolled products are supplied with tolerances in accordance to EN 10131. More narrow thickness tolerances according to the SSAB standard are available up on request.

Delivery Conditions

Cold rolled.

Fabrication and Other Recommendations

For information concerning fabrication, see SSAB’s brochures on www.ssab.com or consult Tech Support, [email protected].

Appropriate health and safety precautions must be taken when bending, welding, cutting, grinding or otherwise working on the product.