Strenx performance steel

Strenx® 1100 CR

Loading component...

Dimension Range

Mechanical Properties

Yield strength Rp0.2
(min MPaksi)
Yield strength Rp0.2
(min MPaksi)
1100160
Tensile strength Rm
(MPaksi)
1300 - 1500189 - 218
Elongation A80
(min %)
3
Min. inner bending radius for a 90° bend 1)
(x t)
3.5

1) For both longitudinal and transverse direction.
The mechanical properties are tested in the longitudinal direction.
The mechanical properties are guaranteed in coil condition.

 

 

 

Chemical Composition (heat analysis)

C
(max %)
C
(max %)
0.16
Si
(max %)
0.40
Mn
(max %)
1.80
P
(max %)
0.020
S
(max %)
0.010
Al
(min %)
0.015
Nb+Ti
(max %)
0.10

 

 

 

 

 

Carbon Equivalent CET(CEV)

Thickness (mminches)
Thickness (mminches)
Typ CET(CEV)
0.7 - 2.10.028 - 0.083
0.30 (0.41)
CET and CEV formula

Thickness

Tolerances according to Strenx® Thickness Guarantees.

Strenx® Thickness guarantees meet the normal thickness tolerance requirements of EN 10131.

 

Length and Width

Tolerances according to EN 10131. Narrower tolerances according to the SSAB standard are available on request. Length tolerances only applyfor cut to length sheets. 

 

Flatness

Tolerances according to Strenx® Flatness Guarantees Class B.

Strenx® Flatness Guarantees offer narrower tolerances compared to EN 10 131. Flatness guarantees only applyfor cut to length sheets.

 

Delivery Conditions

Cold rolled. Strenx® CR is available with mill or cut edge.

 

Fabrication and Other Recommendations

Welding, bending and machining

Strenx® CR has good cold forming, welding and cutting performance.

For information concerning fabrication, see SSAB´s brochures on www.ssab.com or consult Tech Support, [email protected]. Appropriate health and safety precautions must be taken when bending, welding, cutting, grinding or otherwise working on the product

 

Strenx® 1100 CR high-strength structural steel

Loading component...

Loading component...