Strenx® 700 E/F
Loading component...
Dimension Range
Strenx® 700 E is available in plate thicknesses of 4.0 – 160.0 mm and Strenx® 700 F is available in plate thicknesses of 4.0 - 130.0 mm. Both grades are available in widths up to 3350 mm and lengths up to 14630 mm depending on thickness. More detailed information on dimensions is provided in the dimension program.
Mechanical Properties
(mminches)
(mminches)
(min MPaksi)
(MPaksi)
(min %)
(mminches)
(mminches)
(min MPaksi)
(MPaksi)
(min %)
(mminches)
(mminches)
(min MPaksi)
(MPaksi)
(min %)
For transverse test pieces.
Impact Properties
Charpy V 10x10 mm test specimen 1)
Charpy V 10x10 mm test specimen 1)
1) Unless otherwise agreed, transverse impact testing according to EN 10025-6 option 30 will apply. For thicknesses between 6 - 11.9 mm, sub-size Charpy V-specimens are used. The specified minimum value is then proportrional to the cross-sectional area of the specimen compared to a full-size specimen (10 x 10 mm).
Chemical Composition (ladle analysis)
(max %)
(max %)
(max %)
(max %)
(max %)
(max %)
(max %)
(max %)
(max %)
(max %)
(max %)
The steel is grain refined. *) Intentional alloying elements.
Carbon Equivalent CET(CEV)
Strenx® 700 E
Strenx® 700 F
Thickness
Tolerances according to Strenx® Thickness Guarantees.
Strenx® Guarantees meet the requirements of EN 10029 Class A, but offers narrower tolerances.
Length and Width
According to SSAB’s dimension program. Tolerances conform with EN 10029 or to SSAB’s standard after agreement.
Shape
Tolerances according to EN 10029.
Flatness
Tolerances according to Strenx® Flatness Guarantee Class C, which are more narrow than EN 10029 Class N.
Flatness tolerances for Strenx® 700 F are guaranteed after cutting with laser, plasma or waterjet.
Surface Properties
According to EN 10163-2 Class A, Subclass 3.
Delivery Conditions
The delivery condition is Quenched and Tempered. The plates are delivered with sheared or thermally cut edges. Untrimmed edges after agreement.
Delivery requirements can be found in SSAB’s brochure Strenx® Guarantees or on www.ssab.com.
Fabrication and Other Recommendations
Welding, bending and machining
Recommendations are found in SSAB’s brochures at www.ssab.com or consult Tech Support.
Strenx® 700 E/F has bending guarantees according to Strenx® Bending Guarantees Class A. Strenx® 700 E/F has obtained its mechanical properties by quenching and subsequent tempering. The properties of the delivery condition cannot be retained after exposure to temperatures in excess of 580ºC.
Appropriate health and safety precautions must be taken when welding, cutting, grinding or otherwise working on this product. Grinding, especially of primer coated plates, may produce dust with a high particle concentration.
