Strenx® 900 Plus
Loading component...
Dimension Range
Strenx® 900 Plus is available as cut to length sheets in thicknesses of 2.0 - 8.0 mm. Strenx 900 Plus is available in widths up to 1600 mm and lengths up to 16000 meters depending on thickness. Please contact your sales representative for more information regarding dimensions.
Mechanical Properties
(mminches)
(mminches)
(min MPaksi)
(MPaksi)
(min %)
1) If ReH is not applicable then Rp0.2 is used.
The mechanical properties are tested and guaranteed in both longitudinal and transverse direction.
Impact Properties
Charpy V 10x10 mm test specimen
Charpy V 10x10 mm test specimen
1) Impact testing according to EN ISO 148-1 is performed on thicknesses ≥ 6mm. For thicknesses between 6.0 - 7.0 mm, sub-size Charpy V-specimens are used. The specified min value is then proportional to the cross-sectional area of the specimen compared to a full-size specimen (10x10 mm).
Chemical Composition (heat analysis)
(max %)
(max %)
(max %)
(max %)
(max %)
(max %)
Carbon Equivalent CET(CEV)
Thickness
Tolerances according to Strenx® Thickness Guarantees. Strenx® Guarantees offer considerably narrower thickness tolerances compared to EN 10 051.
Length and Width
Width and length tolerances according to SSAB standard. The SSAB standard offer narrower width and length tolerances compared to EN 10 051. Length tolerances only applyfor cut to length sheets.
Shape
Tolerances according to EN 10 051. Narrower tolerances according to the SSAB standard are available on request.
Flatness
Tolerances according to Strenx® Flatness Guarantees Class A. Strenx® Flatness Guarantees offer narrower tolerances compared to EN 10 051. Flatness guarantees only applyfor cut to length sheets.
Surface Properties
Delivery Conditions
Strenx® Plus is supplied in as rolled surface condition, pickled surface is available in a limited thickness range. The delivery condition is Q+T (Quenched and Tempered).
Deliveryrequirements can be found in SSAB’s brochure Strenx® Guarantees or on www.ssab.com.
Fabrication and Other Recommendations
Welding, bending and machining
Strenx® Plus has very good weldability with good toughness and strength in the welds.
Strenx® Plus has good forming and cutting performance.
Strenx® Plus is not suited for applications requiring hot working or heat treatments at temperatures above 400°C, since the material then maylose its guaranteed properties..
For information concerning fabrication, see SSAB´s brochures on www.ssab.com or consult Tech Support, [email protected].
Appropriate health and safety precautions must be taken when bending, welding, cutting, grinding or otherwise working on the product.
