Docol® 1700M martensitic

Loading component...

Loading component...

General Product Description

A martensitic steel for automotive applications, Docol 1700M allows for increased crashworthiness, lightweight design and cost-efficient production methods for the automotive industry. Docol 1700M is one of the strongest cold rolled advanced high-strength steels on the market and has become the material of choice for automotive applications such as bumper systems and structural components.

Dimension Range

Cold rolled / UC: thickness 1.00-2.10 mm, width up to 1250 mm.

Slit strip and cut to length sheets are available upon request.

Mechanical Properties

Docol CR​1350Y​1700T-​MS

Standard
VDA 239-100
Coating
UC
Test direction
L
Yield strength Rp0.2
(MPa)
1350 - 1700
Tensile strength Rm
(MPa)
1700 - 2000
Elongation A80
(min %)
3
BH2
(min MPa)
30
Min. inner bending radius for a 90° bend
4.0 x t

Chemical Composition (ladle analysis)

Docol CR​1350Y​1700T-​MS

Coating
UC
C
(max %)
0.35
Si
(max %)
1.00
Mn
(max %)
3.00
P
(max %)
0.020
S
(max %)
0.010
Al
(%)
From 0.010
Nb+Ti
(max %)
0.15
Cr+Mo
(max %)
1.00
B
(max %)
0.010
Cu
(max %)
0.20

Tolerances

Cold rolled (UC): Tolerances in accordance to EN 10131.

Customized dimensional and shape tolerances are available upon request.

The following improved flatness tolerances are available for cold rolled products upon request.

Thickness
(mminches)
Thickness
(mminches)
1.00 - 1.390.0394 - 0.0547
Max height 1)
(mm)
8
Thickness
(mminches)
Thickness
(mminches)
1.40 - 1.590.0551 - 0.0626
Max height 1)
(mm)
7
Thickness
(mminches)
Thickness
(mminches)
1.60 - 1.790.0630 - 0.0705
Max height 1)
(mm)
6
Thickness
(mminches)
Thickness
(mminches)
1.80 - 2.100.0709 - 0.0827
Max height 1)
(mm)
5

1) Distance from the top surface of the strip normal to flat surface. Measured with a ruler on sheets of mother coil width and minimum length 1500 mm. Cross bow and coil set excluded.

Surface Treatments

Uncoated (UC): available as oiled.

All surface treatments are in accordance with RoHS directive (2011/65/EU) and do not contain Chromium VI (Cr6+). Surface treatments provide only temporary surface protection during transportation and storage. In order to avoid corrosion damages, care must be taken to keep the products dry during transportation and storage. If they become wet, they must be separated and situated so that they are dried quickly.

Fabrication and Other Recommendations

For information concerning fabrication, see SSAB’s brochures on www.ssab.com or consult Tech Support, [email protected].

Appropriate health and safety precautions must be taken when bending, welding, cutting, grinding or otherwise working on the product.

Docol® Martensitic steel product offer

Loading component...

Loading component...

Related content

Loading component...